Backcountry Horse Tack: Choosing What Works and What Doesn’t

When it comes to backcountry horse tack, good equipment is something you should be able to depend on without giving it much thought. A well-made saddle, properly fitted to the animal, can provide years of dependable service. The same goes for bridles, breast collars, breeching, and the rest of the equipment used on a working pack string.

There’s no need to make choosing backcountry tack more complicated than it has to be. Quality, proper fit, and practical design are what matter most. Fancy equipment isn’t necessarily better equipment, and an expensive saddle isn’t worth much if it doesn’t fit the horse you’re putting it on.

After years of riding and packing in the mountains, I’ve found that the best tack is usually the equipment that does its job, holds up to regular use, and doesn’t require much attention beyond ordinary care.

Start With a Good Saddle

Of all the tack you’ll purchase, your saddle is probably the most important investment. Whether you’re spending a few hours riding or covering miles of mountain trails, the saddle needs to fit both you and your horse.

A saddle that fits one horse perfectly may not fit another. Horses differ in the shape of their backs, the height of their withers, and the way they’re built through the shoulders. These differences can affect how a saddle sits and how comfortably the horse carries it.

It’s worth taking the time to find a saddle that fits properly rather than choosing one simply because you like its appearance or the name stamped on it. If you’re new to horses, having an experienced horseman help you evaluate saddle fit can save considerable trouble.

A good saddle doesn’t need a lot of decoration or unnecessary accessories. What matters is a sound tree, quality construction, dependable rigging, and a comfortable, secure seat.

Once you find a saddle that works particularly well on a certain horse, there’s something to be said for keeping that combination together. In a working string, equipment that fits well and has proven dependable is worth hanging on to.

Breast Collars, Breeching, and Mountain Terrain

Mountain country places different demands on tack than riding around relatively level ground. Steep climbs, long descents, and uneven trails make proper saddle rigging particularly important.

A breast collar helps keep the saddle from sliding backward when climbing steep grades. Breeching serves a different purpose, helping prevent the saddle from moving forward when traveling downhill.

Breeching is commonly associated with pack animals, but it can also be useful on riding horses, depending on the animal and the country being traveled.

A rear cinch is another piece of equipment sometimes misunderstood. Its primary purpose is to help keep the back of a riding saddle from lifting, particularly in activities such as roping. It doesn’t perform the same job as breeching.

None of this equipment needs to be complicated, but it does need to be adjusted correctly. A breast collar or breeching that fits one animal may need considerable adjustment when moved to another.

One rule of thumb I’ve used for adjusting breast collars and breeching is to slip my hand between the strap and the animal. My hand should slide through without much resistance. The strap shouldn’t be hanging loose, but it shouldn’t be tight against the animal either. It’s a simple way to check the adjustment before heading out.

The important thing is that the saddle stays where it belongs without restricting the animal’s movement or causing unnecessary rubbing.

Choosing the Right Backcountry Horse Tack

For packing, I’ve preferred Decker-style pack saddles. They’re practical, versatile, and well suited to the kind of work involved in carrying supplies and equipment through mountain country.

As with a riding saddle, the pack saddle needs to fit the animal carrying it. A sound tree, dependable rigging, proper padding, and correctly adjusted breast collars and breeching are all important.

The load itself also makes a difference. Even a properly fitted pack saddle can become troublesome when the weight is poorly balanced or the load isn’t secured correctly.

A pack animal carrying an uneven load may have the saddle pulled to one side. This is one reason proper loading and tying are just as important as the saddle itself.

Good pack equipment doesn’t have to be elaborate. In fact, there’s an advantage to simple equipment that can be adjusted easily and repaired when necessary.

Bridles, Reins, and Everyday Riding Tack

When it comes to bridles and reins, I prefer straightforward, dependable equipment.

A good leather bridle with quality hardware will generally give years of service when properly cared for. The bit should be appropriate for the horse and something the animal is accustomed to using.

I’ve also favored split reins. They’re practical for the kind of riding involved in mountain country, where a rider may be getting on and off frequently or dealing with different situations along the trail.

Saddlebags are another useful piece of riding equipment. They provide a convenient place to carry food, rain gear, and other supplies needed during the day.

The important thing is to keep the load reasonable and properly secured. When pack animals are available to carry the heavier equipment, there’s little reason to overload your riding horse.

Saddle strings and other attachments are useful for securing additional gear, but loose straps and dangling equipment can catch on brush or other obstacles. Everything should be tied down neatly before heading out.

Saddle Pads and Cinches

A saddle pad or blanket serves a simple but important purpose: providing cushioning between the saddle and the animal’s back.

The pad needs to work with the saddle and fit the horse. It should lie smoothly without wrinkles, dirt, or other material that could cause rubbing.

Keeping pads reasonably clean and dry is part of ordinary horse care. A little attention when saddling can prevent discomfort later in the day.

The same practical approach applies to cinches. Choose a good-quality cinch that fits the horse and works properly with the saddle. I’ve used mohair cinches, although the best choice can depend on the animal and equipment.

A cinch should be snug enough to keep the saddle secure without being unnecessarily tight. It’s also a good practice to check it again after riding a short distance, particularly when starting out for the day.

Quality Tack Is Usually a Long-Term Investment

One thing worth remembering is that good tack doesn’t wear out overnight.

A well-made saddle or bridle can remain in service for many years. In fact, much of the equipment used in a working pack string may be several years old and still doing its job just fine.

When purchasing tack, I pay attention to the leather, stitching, rivets, buckles, and other hardware. These are the parts that determine how well the equipment will hold up under regular use.

I would rather spend more for something dependable than save a little money on equipment that won’t last. That doesn’t mean the most expensive product is automatically the best choice. You’re paying for sound construction and useful features, not a fancy appearance.

Used tack can also be a good investment if it’s in sound condition. Look it over carefully, particularly the saddle tree, leather, stitching, and hardware.

There isn’t much reason to replace good equipment simply because it’s getting older.

Caring for Backcountry Horse Tack

Caring for tack is mostly a matter of ordinary maintenance.

Leather needs occasional cleaning and conditioning to keep it flexible. Dirt and mud should be removed when practical, and wet equipment should be allowed to dry gradually rather than being placed too close to a hot stove or other strong heat source.

In a backcountry camp, keeping saddles and other tack under shelter helps protect them from the weather. Leaving wet equipment piled together isn’t a good practice, especially when it may be several days before everything has a chance to dry properly.

Before heading out each day, it’s worth giving the equipment a quick inspection while saddling. Check the cinches, latigos, breast collars, breeching, and other rigging for anything that needs attention.

At the same time, look over the animal’s back and the areas where the saddle and straps make contact.

These checks become part of the daily routine. They don’t need to be a lengthy production.

Repairs Are Part of Using Equipment

Over the years, I’ve seen about every kind of tack problem you might expect from equipment that gets used regularly. Leather straps break, stitching wears out, buckles fail, and occasionally something on a pack saddle needs attention.

But that doesn’t mean tack is constantly breaking down in the mountains.

Most repairs and maintenance are taken care of before leaving for the backcountry. If something is worn or questionable, that’s the time to fix it.

Occasional repairs are still necessary in camp or along the trail, but most have been relatively minor. A spare strap, some extra rope, a knife or multitool, and a few basic repair supplies will handle many of the smaller problems.

There’s also an advantage to keeping additional spare equipment at base camp rather than carrying everything you might conceivably need on the trail.

The best approach is to start with sound equipment, take care of it, and know how to make simple repairs when necessary.

What I’d Recommend to Someone Just Starting Out

If you’re putting together your first set of tack for backcountry riding or packing, my advice would be to concentrate on the essentials.

Start with a good saddle that fits your horse. Purchase dependable bridles, cinches, breast collars, and other equipment appropriate for the country you’ll be traveling. Learn how everything works and how it should be adjusted.

Don’t feel you need to purchase every accessory available. With experience, you’ll learn what equipment is genuinely useful and what can be left at home.

Practice using your tack before taking it into remote country. Make sure your saddle fits, your rigging is properly adjusted, and your equipment performs the way it should.

Above all, remember that good equipment is only part of the equation. Knowing your animals and understanding how to handle them matters just as much.

The Bottom Line

Good backcountry tack doesn’t have to be complicated.

Buy quality equipment, make sure it fits your horses and mules, and take reasonable care of it. Well-made saddles, bridles, and rigging can provide years of dependable service, even under the demanding conditions of mountain travel.

There will always be an occasional strap to replace or something that needs adjustment. That’s simply part of working with horses and mules.

The goal isn’t to own the most expensive tack or carry a repair shop into the wilderness. It’s to have dependable equipment that lets you spend your time riding, packing, and enjoying the country you came to see.